SIGNAL S-2653

All-in-one tracking and control solution for transport, fleets, and industrial automation.

2G
GSM

Common Use Cases

Device Features

RS-485 & RS-232 Ready

Wired. Reliable. Universal.
Supports MODBUS. Connect fuel, temperature, and more.

BLE Available

Wireless. Effortless.
Seamlessly connect any BLE sensors to your tracker.

1-Wire Sensors & Driver ID

Simple. Accurate. Connected.
Integrate temperature sensors, iButton driver ID keys, and more via 1-Wire interface.

Dual CAN Connected

Vehicle data. No delay.
Fuel, RPM, mileage — straight from the bus.

Custom Algorithm

Smart triggers. Smarter fleets.
Create your own logic inside the device.

Two-Way Communication

Stay connected. Act faster.
Exchange instructions with drivers instantly.

Technical Specifications

Universal Inputs: 6 (with overvoltage protection up to 200 V)
Each input can operate in Digital, Impulse, Frequency, Analog, or Tachometer mode (for RPM calculation).
Digital Outputs: 4 (up to 48 V / 500 mA, open collector type)
USB Interface: Mini-USB (configuration, data, diagnostics)
1-Wire Interface: supported
RS-485 Interface: supported
CAN Interface: Dual CAN
Supported Antennas: Internal GNSS / Cellular
3-Axis Accelerometer: supported

Version: 4.0 + LE (up to 4 BLE sensors supported)
Supported Peripherals: Fuel Level, Temperature & Humidity, Axle Load, Tilt Angle
All Sensor Parameters: Battery Voltage, Signal Strength, Pressure, Illumination, etc.

Input Voltage Range: 9.5 – 47 V DC
Average Current Consumption (12 V): 75 mA
Current Consumption (12 V, GNSS & GSM off): 25 mA
Max. Current Consumption (12 V): 200 mA
Overvoltage Protection: up to 500 V
Backup Battery: Li-Po, 3.7 V, 800 mAh
EEPROM Data Retention (power-off): 5 days

Supported Systems: GPS / GLONASS / BeiDou
Channels: 99 acquisition, 33 tracking
Sensitivity: –167 dBm (tracking), –149 dBm (cold start)
Time to First Fix: Hot start < 1 s, Warm start < 22 s, Cold start < 29 s
Accuracy (CEP, static, –130 dBm): 2.5 m (horizontal), 5 m (vertical)
Update Rate: 1 Hz

Network: GSM / GPRS
Max Data Rate: 85.6 kbps
2G Bands: Class 4 (2W) in GSM 850 and EGSM 900, Class 1 (1W) in DCS 1800 and PCS 1900
Data Support: SMS (Text / Data)
SIM Slots: 2
SIM Type:
– Slot 1: External, mini-SIM
– Slot 2: Internal, nano-SIM

Internal Memory: 8 MB Flash
Data Storage: up to 51 500 records
External Memory: microSD card support (up to 32 GB)
Telemetry Records on microSD: not less than 2 000 000 per 1 GB

Operating Temperature (with internal battery): –20 °C to +60 °C
Operating Temperature (without internal battery): –40 °C to +85 °C
Storage Temperature (with internal battery): 0 °C to +40 °C
Storage Temperature (without internal battery): –40 °C to +85 °C
Charging Temperature (internal battery): 0 °C to +50 °C
Humidity: up to 95% (at +35 °C, non-condensing)

Ingress Protection: IP54
Shock Resistance: up to 24 g
Dimensions: 105 × 78 × 20.5 mm (L × W × H)
Weight: 98 g
Indicators (LEDs): SYS, GSM, GNSS

Product Center

FAQ

You can download the latest version of NTC Configurator here:
Get the latest version

Note: Available for Windows OS only.

  • SMS Commands
    Send direct commands to the device (e.g. APN, server, status, reboot).
    Full command list

  • Remote connection via NTC Configurator
    Connect to an online device via Internet, read/write config, update firmware.
    How it works

  • DRC Cloud Service
    Cloud-based platform for remote updates, config sync, diagnostics, and device health monitoring.
    Learn more

You can find the full list of SMS/GPRS commands here:
Full command list

If you need a complex combined command, please contact Technical Support at support@navtelecom.in

  • 2G models are budget-friendly and work where 2G networks are stable.

  • 4G models support both 4G and 2G, offering longer lifecycle and future-proof connectivity.

Need advice? Contact support@navtelecom.in

All Navtelecom devices are covered by a 3-year warranty.
The backup battery and the RTC battery (clock battery) are covered for 1 year.